You have 0 items in your cart.
Sub Categories
Here, you will find out more about our company,KKInstruments. And hopefully, you will get to...
In engineering, the airflow or air flow is a measurement of the amount of air per unit of time...
cable is most often two or more wires running side by side and bonded, twisted, or...
Follow legal stipulations and at the same time save costs in deep-frying.
The oil in your...
Distance (or farness) is a numerical description of how far apart objects are. In physics or...
Performance characteristics: The box body and the lamp cap shell is made from high strength...
World's best-in-class accuracy 2D measurement systemA sophisticated height gage offering...
The KKInstruments high voltage testing equipment range has been specially designed for the safe and...
Hipot is an abbreviationhigh potential. Traditionally, hipot is a term given to a class of...
Humidity is the amount of water vapor in the air. Water vapor is the gas phase of water and...
Electrical impedance is the measure of the opposition that a circuit presents to a current when a...
The lux (symbol: lx) is the SI unit of illuminance and luminous emittance, measuring luminous flux...
The Tohoku Earthquake, tsunami and Fukushima Daichi disaster created many challenges for the people...
The PDSurveyor™ family has been designed to carry out Partial Discharge detection by all...
physics, power is the rate at which energy is transferred, used, or...
For items selling at promotional price, we only accept walk-in, cash and carry from any of...
A refractometer is a laboratory or field device for the measurement of an index of refraction...
Sound is a sequence of waves of pressure that propagates through compressible media such as air...
Infrared thermography (IRT), thermal imaging, and thermal video are examples...
Application: Accurately measuring remaining wall thickness of metal pipes, tanks, beams, ship...
Vibration is a mechanical phenomenon whereby oscillations occur about an equilibrium point. The...
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
NIC0008-CM-8826FN DIGITAL PAINT COATING THICKNESS GAUGE WITH CABLE | Operating principle: magnetic induction/eddy current (F/NF) Measuring range:0-1250um/0-50mil Resolution; 0.1/1 Accuracy: 3%n or 5um | Paint coating thickness gauges(ultrasonic) |
|
|
|
NIC0007-CM-8801FNV2 DIGITAL PAINT COATING THICKNESS GAUGE | NIC0007 CM-8801FNV2 NEW DIGITAL PAINT COATING THICKNESS GAUGE ON FERROUS/NON-FERROUS BASED METALS Applications: Automotive Trade This is a great tool for car dealerships, used car buyers, appraisers, insurance agents, body shops and collision centers. It will allow you to measure the paint thickness and to identify parts of the car that might have been repaired and repainted. This might indicate previous, unreported accidents which impact the value of an used car, minivan or... | Paint coating thickness gauges(ultrasonic) |
|
|
|
NIC2001-CM-8855 PAINT COATING THICKNESS GAUGE METER COMPLETE W/ FEROUS/NON-FEROUS PROBES | This Coating Thickness Meter is an ideal gauge for automotive and painting applications.It uses magnetic induction and eddy current principle to measure thickness of magnetic and non-magnetic surface and detect the thickness of nonmagnetic coating on a magnetic substrate (ferrous, F) or an insulating coating on a non-magnetic conductive substrate (non-ferrous, NF). | Paint coating thickness gauges(ultrasonic) |
|
|
|
ELE3100-ELEKTROPHYSIC QUINTSONIC ULTRASONIC PAINT COATING FOR NON-METAL/METAL BASE | Application Non-destructive measurement of: Paint, plastic, enamel and other insulating coatings applied on wood, plastic, glass and ceramic Polymer layers on metal Performance features Measurement of the total thickness as well as the individual layer thickness of a multi-layer system in only one operation High accuracy and reproducibility Storage and documentation of measuring values Memory capacity: Maximum 10,000 measuring values in maximum 500 batches Measuring range... | Paint coating thickness gauges(ultrasonic) |
|
|
|
NIC0007B-ENHANCED DIGITAL COATING THICKNESS GAUGE FOR METAL BASE (FERROUS/ NON-FERROUS) | DESCRIPTION This compact gauge can be used for non-destructive coating thickness measurement of non-magnetic coatings, e.g. paint, enamel, chrome on steel, and insulating coatings, e.g. paint and anodizing coatings on non-ferrous metals. The internal probe can work on both principles, magnetic induction and the eddy currents. The probe can automatically detect the substrates type (Magnetic or not), and calculate the coating thickness and display it fast. There are five data groups, and readings... | Paint coating thickness gauges(ultrasonic) |
|
|
|
KET0062 - KETT L-600 (REPLACE OLD KETT LH-373) STANDARD COATING THICKNESS TESTER (METER ONLY) | Flagship model of coating thickness tester Must be used with an optional probe (See "Applicable probe" column.) Automatic statistical calculations (Average, standard deviation, max and min value) Equipped with 4 measurement modes (Single / Free / Scan / Scan average) Expert model can be connected with Android app via Bluetooth® (To be released in 2025 Spring) Specifications Measurement Method Electromagnetic induction or eddy-current *Depends on... | Paint coating thickness gauges(ultrasonic) |
|
|
|
NIC0008B-PAINT COATING THICKNESS GAUGE METER COMPLETE WITH EXTERNAL FEROUS/NON-FEROUS PROBES-510FN
|
● 2 Measuring modes: continuous/single● 2 Shutdown modes: manual/automatic●Wide measuring range with 5 probes available (next page)●Direct testing mode and block statistics mode (APPL/BATCH)●Can connect with printer to out of statistical values●Dataview to connect with PC with USB 2.0 port●500 datas can be stored Can use various probe (F400, F1, F1/90 °, F10, N1, N400, etc.) measurement;Three calibration methods: one point calibration, two point calibration, the basic... | Paint coating thickness gauges(ultrasonic) |
|
|
|
TIM001-TT100SV2 DIGITAL ULTRASONIC THICKNESS GAUGE FOR METALLIC/NON-METALLIC MATERIALS-1.20MM - 225.0MM
|
The TIM001is the most popular ultrasonic thickness gauge sold in Australia. It is a low cost, hand-held microprocessor controlled thickness gauge specifically designed for measuring the thickness of metallic and non-metallic materials e.g. aluminium, titanium, plastic, plastics, ceramics, glass and any other good ultrasonic wave-conductor as long as it has parallel top and bottom surfaces. | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
TIM006A-5MHz 8mm Probe Transducer Sensor for Ultrasonic Thickness Gauge Meter
|
Introduction:Name: Probe for Ultrasonic Thickness GaugeModel: PT-08 (Lemo 00 connector)Frequency: 5MHzDiameter of the contact proportion: 8mmMeasuring Range: 0.8mm-300.0mmAvaliable Contact Temperature: ﹣10ºC-60ºCApplicaiton: use for all Ultrasonic thickness gauge | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
TIM001B-ENHANCED DIGITAL ULTRASONIC THICKNESS GAUGE FOR METAL/NON-METAL MATERIALS-0.75MM~225.0MM
|
1. Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. 2. Transducer models are available for special application, including for coarse grain material and high temperature applications. 3. Probe-Zero function, Sound-Velocity-Calibration function. 4. Two-Point Calibration function. 5.Coupling status Indicator showing the coupling status. 6. Battery information... | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
TMT101A-ADVANCED GRAPHICAL ULTRASONIC THICKNESS GAUGE (A-SCAN SNAPSHOT + THROUGH -PAINT FUNCTION)
|
Color 320x240 Pixels Display A-Scan Snapshot Echo-Echo Mode(Thru Paint & Coatings) Stores 100,000 Readings Gain: Low, Medium or High for varying test conditions | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
TMT102A-ADVANCED GRAPHICAL ULTRASONIC THICKNESS GAUGE (Live Color A-Scan +Time-based B-Scan + Through -paint function)
|
*Color OLED 320x240 Pixels Display *Live Simultaneous Color A-Scan and Thickness Display *Control of Gain, Blanking, Gate, Range, Delay, RF and Rectify Modes *Time-based B-Scan Display *Echo-Echo Mode,Thru Paint & Coatings | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
CYG001-CYGNUS DIVE WRIST-MOUNTED UNDER WATER ULTRASONIC THICKNESS GAUGE
|
With its bright, very large, AMOLED display the Cygnus DIVE is simple to operate, providing accurate and reliable thickness measurements, underwater. Depth rated to 300 metres. Available with data logging, topside, HelmetView™ and twin crystal probe options. MSI™ Measurement Stability Indicator - this is a feature exclusive to the Cygnus. When using the DIVE Gauge in Single Echo mode, MSI™ confirms when a reading is stable by turning the thickness measurement numbers from red to... | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
CYG002-CYGNUS 1 UNDERWATER ULTRASONIC THICKNESS GAUGE
|
The Cygnus Underwater is the original diver held subsea multiple echo Ultrasonic Thickness Gauge. It was designed for use by divers undertaking subsea maintenance and surveys 3 decades ago… and today it is still the industry standard. The unit is depth rated to 300 metres and it provides an accurate metal thickness measurement through coatings up to 20mm thick. The bright LED display ensures easy viewing even in poor visibility conditions. The Underwater Thickness Gauge is supplied ready to... | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
TMT109-HIGH PRECISION ULTRASONIC THICKNESS GAUGE(0.15mm – 20.0mm)
|
HIGH ACCURACY AND RESOLUTION UP TO 0.001mm or 0.0001 inch MEASURING ULTRA THIN SAMPLE AS LOW AS 0.15mm or 0.006 inch DISPLAY UNITS : IMPERIAL and METRIC AUTOMATIC SELF CALIBRATION COUPLANT INDICATOR AUTOMATIC POWER OFF DEVICE HIGH-LOW LIMIT ALARM LCD BRIGHTNESS ADJUST LOW BATTERY INDICTOR TECHNICAL SPECIFICATIONS: Measuring Range (for steel) Interface-Echo Mode: (I-E or Standard Mode) 1.50mm – 20.0mm (0.059in – 0.787 in) Echo-Echo Mode: (E-E or High... | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
CIA012-Basic Ultrasonic Thickness Gauge
|
Product Description Auto Calibration to assure the accuracy Auto linear compensation: this advanced software program enhances the precision by correcting the non-linear accuracy of transducer Use ▲ and ▼ keys to make a quick adjustment for the sound velocity/thickness and a quick recall to the stored data Coupling status indication: Observing the coupling icon to learn if the coupling is accomplished or not 10 thickness measurement storage and recall function available, which... | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
TIM001C-DIGITAL ULTRASONIC THICKNESS GAUGE FOR METAL/NON-METAL MATERIALS-0.75MM~225.0MM-W SOFTWARE | Features 1.Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. 2.Transducer models are available for special application, including for coarse grain material and high temperature applications. 3.Probe-Zero function, Sound-Veloctiy-Calibration function. 4.Two-Point Calibration function. 5.Coupling status Indicator showing the coupling status. 6.Battery... | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
TMT114-CROSS HATCH CUTTER | Specifications H cross hatch cutter is applicable to determine the adhesion of organic coatings by cross-hatching. This instrument is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice oattern is cut into the coating, penetrating through to the substrate. The Cross Hatch Cutters conform with the requirements of :BS 3900 E6;BS/EN ISO 2409;ASTM D 3359;GB/T 9286, ,it is economy. Main Technical Parameters: 1.Six working... | CROSS HATCH CUTTER |
|
|
|
PRO0021-6200V3 Graphic Power Clamp for 1-,3-phase (PF,Harmoncs,KWH) | Analysis for Single Phase and Balanced 3 phase system True RMS Value (V and I) Active Power (K,KW,MW,GW) Apparent (VA,KVA,MVA) and Reactive Power (VAR,KVAR,MVAR) Power Factor (PF), Phase Angle( Φ ) Energy (WH,KWH,KVARH,PFH) Programmable PT(1 to 3000)Ratios Display of Overlapped Voltage and Current Waveform Maximum Demand (MD in W,KW,MW) with programmable Period Harmonic Analysis (V and I) to 50th Order Display of 25 Harmonics in one screen Optical Isolated RS-232C... | Power clamps |
|
|
|
HIO0006-3286-20 POWER CLAMP METER | Functionality and Safety Packed into a Handheld Unit Use as a single-phase power meter Measure phase on a single-phase line Simple checking of three-phase lines Check power supply fluctuations For harmonic suppression External output of data to PC Printer output to 9442 (optional) | Power clamps |
|